SANSIL 3D
Square service keys and technical keys – plumbing, maintenance
Square service keys and technical keys — made to order, to your own dimensions.
from €2.5 / piece
Technical parts
Supports, guides and parts for ovens and drying tunnels
Supports, guides and parts for ovens and drying tunnels in PC — continuous heat resistance.
from €6.9 / piece
What it is for
- Free up the worktop
- Fix to a wall or an extrusion profile
- Prevent breakage from falls
Equip your hot zones: part racks and supports for ovens, tunnel conveying guides and stops, drying hooks and baskets, heat-resistant spacers and shims, sensor protection covers. PC for bakes up to ~120 °C, PPS-CF beyond (to 200 °C by cycle — validated on your process before series).
Sized for your equipment, with screw paths and clearances built in. PC is specified here for continuous heat resistance; another material remains possible depending on the real constraint on the part. Every order starts with a printability review: thin walls, overhangs and material shrinkage are flagged before production, not after.
Recommended materials
| PC | Polycarbonate: impact resistance and service beyond 110 °C. |
|---|---|
| PA6-CF | Carbon-filled nylon: stiff, light, low creep. |
Another material is possible: tell us the real constraint — temperature, UV, impact, contact — and we will propose one.
Specifications
| Recommended materials: PC, PA6-CF |
| Part envelope up to 350 × 350 × 350 mm |
| Typical tolerance ±0.3 mm, ±0.15 mm on request |
| Support removal included, no other post-processing |
Frequently asked questions
Can I order a single part?
Yes. There is no minimum order: a one-off is handled exactly like a production run.
I don't have a 3D file — is that a problem?
No. A drawing, a dimensioned photograph or the original part is enough: we model it in Fusion 360 and hand over the STEP file as well.
Is the price shown a firm price?
It is an entry price. A firm quotation is issued within 24 working hours, based on your actual geometry and the quantity required.
Related items
PA6-CF technical parts – carbon-fibre-filled nylon
PA6-CF technical parts — high stiffness and low creep.
from €7.9 / piece
Polycarbonate (PC) parts – high temperature and impact resistance
Polycarbonate (PC) parts — service temperature beyond 110 °C.
from €6.9 / piece
Firm quotation within 24 working hours · From 1 piece · Made in France · Shipping across Europe
Price my part