SANSIL 3D
Drilling jig with 32 mm hole spacing
A part that transfers the same dimension identically, as many times as needed, to your dimensions and from the very first one.
Illustrative images. The model, dimensions, material, colour and finish are agreed in the approved quotation before production.
Jigs, fixtures and gauges
Right-angle marking template
A part that transfers the same dimension identically, as many times as needed, to your dimensions and from the very first one.
On quotation — answer within 24 working hours
What it is for
- A part that transfers the same dimension identically, as many times as needed
- Order without paying for a mould or a minimum quantity
- Plan a sample if needed, priced in the quote
Right-angle marking template. It is the part that transfers the same dimension identically, as many times as needed — built for your assembly, not for an average one.
Without a 3D file, send a dimensioned drawing, photos with a scale or information about the part. These allow an initial assessment; further measurements or tests may be needed. Any design work is specified in the quote before you agree.
Material selection depends on temperature, loads, exposure and part dimensions. We agree the suitable material and process with you before production. A material change may affect price and lead time; the quotation reflects these choices.
Feasibility is assessed from your intended use and documents. The quote specifies design work, checks and any tests needed. A replacement part must be validated for its use; resemblance alone does not guarantee the original properties.
The visuals illustrate the type of part being considered. Geometry, dimensions, material and expected appearance are agreed before production. Any design, preparation and manufacturing costs are stated in the quote.
The three materials we recommend
| PLA-CF | the precision of PLA with a stiffness that no longer bends. For a slim part that must stay straight, without moving to a technical material. |
|---|---|
| PETG-CF | the most useful compromise in the range: the toughness of PETG plus the dimensional stability of the fibre. For when it has to be both strong and accurate. |
| PA6-CF | stiff, light, very low creep. This is the material for parts kept under permanent load that must not deform over time. |
Click a material to open its page and download the manufacturer's datasheet (PDF).
Right-angle marking template in PLA-CF: temperature resistance 60 °C; still a 60 °C ceiling: fibre does nothing for heat resistance; other option, PETG-CF if the part must take impacts.
Another material is possible: tell us the real constraint (temperature, UV, impact, contact) and we will suggest one.
What we commit to
| Unit volume up to 350 × 350 × 350 mm |
| From 1 to several hundred parts |
| Usual tolerance ±0.3 mm, ±0.15 mm on request |
| PLA-CF recommended — 20 materials available |
Frequently asked
What if the material you recommend does not suit?
Tell us the real constraint — temperature, UV, contact with a product, load — and we change material. Twenty are available, from PLA to carbon-filled PPS.
Can you modify the original part?
Yes, and that is often the real benefit: thickening a rib that kept breaking, moving a hole, changing a diameter. On a mould, the same correction costs money and takes weeks.
I have no 3D file — is that a problem?
No. A dimensioned drawing, a photograph taken square-on with a ruler beside the part, or the part itself sent by post is enough. We rebuild the geometry and submit the file to you before anything is made.
In the same family
Firm quotation within 24 working hours · From 1 part · Made in France · Shipped throughout Europe
Price my part