SANSIL 3D
Material
PETG-CF — Carbon-fibre reinforced PETG
The most useful compromise in the range: PETG toughness, plus stability.
Use it for
- Production jigs and fixtures that must hold their dimension
- Brackets and mounts that carry load without sagging over time
- Workshop parts that take knocks without breaking
What it will not do
- Three times the price of PETG: only worth it if the load demands it
- Matt, slightly rough surface — not a cosmetic material
- Black only
Specifications
| Full name | Carbon-fibre reinforced PETG |
|---|---|
| Maximum service temperature | 120 °C continuous |
| Density | 1.16 g/cm³ |
| UV resistance | no — choose ASA outdoors |
| Food contact | not certified |
| Colours | 6 shades in the manufacturer's catalogue |
| Availability | in stock |
What we have learned using it
A lot of enquiries come in asking for PETG-CF when PETG is more than enough. We say so: an over-specified part has never won anyone's loyalty.
Consider instead
Available colours
6 shades in the manufacturer's catalogue
PETG-CF 6
Brick RedViolet PurpleIndigo BlueMalachite GreenTitan GrayBlack
Names are the manufacturer's own and serve as the ordering reference. The colour runs through the material, it is not painted on — swatches are indicative, a physical sample prevails.
Compliance and technical data
| RoHS compliance | compliant — manufacturer's test report |
|---|---|
| REACH (SVHC) | no SVHC declared (manufacturer's SDS) |
| Food contact | not certified |
| Fire behaviour (UL94) | not rated |
| Heat deflection temperature (HDT) | 74 °C at 0.45 MPa · 68 °C at 1.8 MPa (ISO 75) |
| Tensile strength (X-Y) | 35 MPa (ISO 527) |
| Flexural modulus (X-Y) | 2 910 MPa (ISO 178) |
| Recommended drying | 65 °C · 8 h |
Values measured by the filament manufacturer on standardised specimens. A printed part will differ with orientation, infill and settings: we validate on a test part on request.
Firm quotation within 24 working hours · From 1 piece · Made in France · Shipping across Europe
Price my part in PETG-CF