SANSIL 3D
Material
ASA-CF — Carbon-fibre reinforced ASA
The best of outdoors: ASA's UV resistance, the fibre's stiffness.
Use it for
- Outdoor brackets and mounts that carry a load
- Roof, façade and street-furniture parts
- Large ASA parts that used to warp while printing
What it will not do
- Three times the price of PETG: only worth it if the load demands it
- Matt, slightly rough surface — not a cosmetic material
- Black only
Specifications
| Full name | Carbon-fibre reinforced ASA |
|---|---|
| Maximum service temperature | 120 °C continuous |
| Density | 1.16 g/cm³ |
| UV resistance | no — choose ASA outdoors |
| Food contact | not certified |
| Colours | 1 shade in the manufacturer's catalogue |
| Availability | in stock |
What we have learned using it
A lot of enquiries come in asking for ASA-CF when PETG is more than enough. We say so: an over-specified part has never won anyone's loyalty.
Consider instead
Available colours
1 shade in the manufacturer's catalogue
ASA-CF 1
Black
Names are the manufacturer's own and serve as the ordering reference. The colour runs through the material, it is not painted on — swatches are indicative, a physical sample prevails.
Compliance and technical data
| RoHS compliance | compliant — manufacturer's test report |
|---|---|
| REACH (SVHC) | no SVHC declared (manufacturer's SDS) |
| Food contact | not certified |
| Fire behaviour (UL94) | not rated |
| Heat deflection temperature (HDT) | 110 °C at 0.45 MPa · 102 °C at 1.8 MPa (ISO 75) |
| Tensile strength (X-Y) | 34 MPa (ISO 527) |
| Flexural modulus (X-Y) | 3 740 MPa (ISO 178) |
| Recommended drying | 80 °C · 8 h |
Values measured by the filament manufacturer on standardised specimens. A printed part will differ with orientation, infill and settings: we validate on a test part on request.
Firm quotation within 24 working hours · From 1 piece · Made in France · Shipping across Europe
Price my part in ASA-CF