SANSIL 3D
Material
TPU — Thermoplastic polyurethane
Rubber-like flexibility. Nothing else does this job.
Use it for
- Seals, dampers, anti-vibration mounts
- Impact protection, non-slip pads
- Robot gripper fingers, where you need to hold without marking
What it will not do
- Slow to print, so more machine time for the same volume
- Will not hold a tight tolerance: the part deforms as you measure it
- Few colours
Specifications
| Full name | Thermoplastic polyurethane |
|---|---|
| Maximum service temperature | 80 °C |
| Density | 1.22 g/cm³ |
| UV resistance | no — choose ASA outdoors |
| Food contact | not certified |
| Colours | 13 shades in the manufacturer's catalogue |
| Availability | in stock |
What we have learned using it
Three hardnesses in stock: 95A (the standard), 90A (softer) and 85A (close to a rubber). The instant quote offers them separately. Tell us whether you want something that squashes like a rubber or that only flexes a little: it changes which material we use, not just a setting.
Consider instead
- PETG — if a little flex is enough
Available colours
13 shades in the manufacturer's catalogue
TPU 95A HF 6
TPU for AMS 7
Names are the manufacturer's own and serve as the ordering reference. The colour runs through the material, it is not painted on — swatches are indicative, a physical sample prevails.
Compliance and technical data
| RoHS compliance | compliant — manufacturer's test report |
|---|---|
| REACH (SVHC) | no SVHC declared (manufacturer's SDS) |
| Food contact | not certified |
| Fire behaviour (UL94) | not rated |
| Heat deflection temperature (HDT) | elastomer: elongation at break > 700 %, HDT and modulus not applicable |
| Tensile strength (X-Y) | 27.3 MPa (ISO 527) |
| Recommended drying | 70 °C · 8 h |
| Saturated moisture uptake | 1,16 % (25 °C · 55 % RH) |
Values measured by the filament manufacturer on standardised specimens. A printed part will differ with orientation, infill and settings: we validate on a test part on request.
Technical data sheets (TDS) from the filament manufacturer, Bambu Lab, in English, as published on its store on 6 September 2026: mechanical and thermal properties measured on specimens, drying and printing conditions. It is the document to attach to a technical file; we also send it with the order on request.
Firm quotation within 24 working hours · From 1 piece · Made in France · Shipping across Europe
Price my part in TPU