SANSIL 3D
Illustrative images. The model, dimensions, material, colour and finish are agreed in the approved quotation before production.
Vending machine shelf divider
A part that puts a vending machine back into service when the part is no longer supplied, to your dimensions and from the very first one.
On quotation — answer within 24 working hours
What it is for
- A part that puts a vending machine back into service when the part is no longer supplied
- Order without paying for a mould or a minimum quantity
- Plan a sample if needed, priced in the quote
Vending machine shelf divider. Designed as the part that puts a vending machine back into service when the part is no longer supplied, it leaves the workshop as a one-off just as readily as in a short run.
Without a 3D file, send a dimensioned drawing, photos with a scale or information about the part. These allow an initial assessment; further measurements or tests may be needed. Any design work is specified in the quote before you agree.
Material selection depends on temperature, loads, exposure and part dimensions. We agree the suitable material and process with you before production. A material change may affect price and lead time; the quotation reflects these choices.
Additive manufacturing allows one part or a production run without an injection mould. File preparation, production, finishing and delivery are set out in the quotation before acceptance. Price depends in particular on material, machine time and quantity.
The visuals illustrate the type of part being considered. Geometry, dimensions, material and expected appearance are agreed before production. Any design, preparation and manufacturing costs are stated in the quote.
Materials to assess for your application
| PA6-CF | stiff, light, very low creep. This is the material for parts kept under permanent load that must not deform over time. |
|---|---|
| PETG-CF | the most useful compromise in the range: the toughness of PETG plus the dimensional stability of the fibre. For when it has to be both strong and accurate. |
| ABS | the first real thermal step, 90 °C. It is also the material that sands and glues best when the part has to be finished after printing. |
Click a material to open its page and download the manufacturer's datasheet (PDF).
Material selection depends on temperature, loads, exposure and part dimensions. We agree the suitable material and process with you before production. A material change may affect price and lead time; the quotation reflects these choices.
Another material is possible: tell us the real constraint (temperature, UV, impact, contact) and we will suggest one.
What we commit to
| Unit volume up to 350 × 350 × 350 mm |
| From 1 to several hundred parts |
| Usual tolerance ±0.3 mm, ±0.15 mm on request |
| Material agreed in the quotation for your application |
Frequently asked
What if the material you recommend does not suit?
Tell us the real constraint — temperature, UV, contact with a product, load — and we change material. Twenty are available, from PLA to carbon-filled PPS.
Can you modify the original part?
Yes, and that is often the real benefit: thickening a rib that kept breaking, moving a hole, changing a diameter. On a mould, the same correction costs money and takes weeks.
I have no 3D file — is that a problem?
No. A dimensioned drawing, a photograph taken square-on with a ruler beside the part, or the part itself sent by post is enough. We rebuild the geometry and submit the file to you before anything is made.
Firm quotation within 24 working hours · From 1 part · Made in France · Shipped throughout Europe
Price my part