wire grommet for 3 mm thick sheet metal

What it is for

• A part that takes a cable through cleanly
• Receive a sample before the rest of the batch is made
• Order without paying for a mould or a minimum quantity

wire grommet for 3 mm thick sheet metal. A part that takes a cable through cleanly, made to your dimensions rather than taken off the shelf.

You do not need a 3D file to order. A dimensioned drawing, a photograph taken square-on with a ruler beside the part, or the broken part sent to us by post is enough: we rebuild the geometry and submit the file to you before anything is manufactured.

The three materials we recommend for this part. PETG, our default choice: the default functional choice. Holds to 70 °C, flexible enough to take a knock without snapping, and it does not crack the way PLA does. ABS: the first real thermal step, 90 °C. It is also the material that sands and glues best when the part has to be finished after printing. PA6-CF: stiff, light, very low creep. This is the material for parts kept under permanent load that must not deform over time.

Envelope up to 350 × 350 × 350 mm, quantities from 1 to several hundred, precision matched to what the part has to do rather than to a commercial standard. All twenty workshop materials remain available for this part, from PLA to carbon-filled PPS rated at 200 °C: if your constraint differs from the one we assumed, tell us and we change material without changing the starting price.

Why work with us. No tooling, no minimum order. Injection moulding needs a mould costing thousands of euros, paid back over tens of thousands of parts. Here there is no mould. One part costs one part. Order 1 unit or 500, the price hides no set-up fee. 20 materials, from PLA to carbon-filled PPS. From decorative work to parts that hold 200 °C, everything is produced in the same workshop. You do not have to change supplier when the requirement turns technical. Change it without paying for a new mould. A dimension to correct, a hole to move: we edit the file and print again. On a mould, the same correction costs money and takes weeks.

Your part, to your dimensions. Send us your 3D file, a dimensioned drawing, a photograph, or simply the part to be copied: we reproduce it faithfully or adapt it, from a single unit, with no tooling cost at all. The images on this page show typical work and are not contractual.

The three materials we recommend

Click a material to open its page and download the manufacturer's datasheet (PDF).

Wire grommet for 3 mm thick sheet metal in PETG: temperature resistance 70 °C; will not survive repeated dishwasher cycles; other option, ABS if it gets hotter than 70 °C.

Another material is possible: tell us the real constraint (temperature, UV, impact, contact) and we will suggest one.

What we commit to

Frequently asked