SANSIL 3D
Damping spacer ring in flexible TPU
A part that shims, centres or spaces two parts to the millimetre, to your dimensions and from the very first one.
The images are examples, not the part delivered. Every part is made from your 3D files or your dimensioned photographs, in the colours you choose, and we can incorporate your logo.
Space and centre
Sheet metal edge protection ring
A part that shims, centres or spaces two parts to the millimetre, to your dimensions and from the very first one.
On quotation — answer within 24 working hours
What it is for
- A part that shims, centres or spaces two parts to the millimetre
- Order without paying for a mould or a minimum quantity
- Receive a sample before the rest of the batch is made
Sheet metal edge protection ring. It is the part that shims, centres or spaces two parts to the millimetre — built for your assembly, not for an average one.
You do not need a 3D file to order. A dimensioned drawing, a photograph taken square-on with a ruler beside the part, or the broken part sent to us by post is enough: we rebuild the geometry and submit the file to you before anything is manufactured.
The three materials we recommend for this part. PETG, our default choice: the default functional choice. Holds to 70 °C, flexible enough to take a knock without snapping, and it does not crack the way PLA does. PA6-CF: stiff, light, very low creep. This is the material for parts kept under permanent load that must not deform over time. PETG-CF: the most useful compromise in the range: the toughness of PETG plus the dimensional stability of the fibre. For when it has to be both strong and accurate.
Envelope up to 350 × 350 × 350 mm, quantities from 1 to several hundred, precision matched to what the part has to do rather than to a commercial standard. All twenty workshop materials remain available for this part, from PLA to carbon-filled PPS rated at 200 °C: if your constraint differs from the one we assumed, tell us and we change material without changing the starting price.
Why work with us. 20 materials, from PLA to carbon-filled PPS. From decorative work to parts that hold 200 °C, everything is produced in the same workshop. You do not have to change supplier when the requirement turns technical. Change it without paying for a new mould. A dimension to correct, a hole to move: we edit the file and print again. On a mould, the same correction costs money and takes weeks. The part you cannot find any more. Mould destroyed, manufacturer gone, reference discontinued: this is where we have no competition. A photograph, a set of dimensions or the broken part is enough to make it again.
Your part, to your dimensions. Send us your 3D file, a dimensioned drawing, a photograph, or simply the part to be copied: we reproduce it faithfully or adapt it, from a single unit, with no tooling cost at all. The images on this page show typical work and are not contractual.
The three materials we recommend
| PETG | the default functional choice. Holds to 70 °C, flexible enough to take a knock without snapping, and it does not crack the way PLA does. |
|---|---|
| PA6-CF | stiff, light, very low creep. This is the material for parts kept under permanent load that must not deform over time. |
| PETG-CF | the most useful compromise in the range: the toughness of PETG plus the dimensional stability of the fibre. For when it has to be both strong and accurate. |
Click a material to open its page and download the manufacturer's datasheet (PDF).
Sheet metal edge protection ring in PETG: temperature resistance 70 °C; will not survive repeated dishwasher cycles; other option, ABS if it gets hotter than 70 °C.
Another material is possible: tell us the real constraint (temperature, UV, impact, contact) and we will suggest one.
What we commit to
| Unit volume up to 350 × 350 × 350 mm |
| From 1 to several hundred parts |
| Usual tolerance ±0.3 mm, ±0.15 mm on request |
| PETG recommended — 20 materials available |
Frequently asked
What if the material you recommend does not suit?
Tell us the real constraint — temperature, UV, contact with a product, load — and we change material. Twenty are available, from PLA to carbon-filled PPS.
Can you modify the original part?
Yes, and that is often the real benefit: thickening a rib that kept breaking, moving a hole, changing a diameter. On a mould, the same correction costs money and takes weeks.
I have no 3D file — is that a problem?
No. A dimensioned drawing, a photograph taken square-on with a ruler beside the part, or the part itself sent by post is enough. We rebuild the geometry and submit the file to you before anything is made.
In the same family
Spacer ring inside diameter 10 mm
A part that shims, centres or spaces two parts to the millimetre, to your dimensions and from the very first one.
shaft locking collar 22 mm diameter
A part that shims, centres or spaces two parts to the millimetre, to your dimensions and from the very first one.
Flanged guide bushing
A part that shims, centres or spaces two parts to the millimetre, to your dimensions and from the very first one.
Flanged centring ring
A part that shims, centres or spaces two parts to the millimetre, to your dimensions and from the very first one.
Cylindrical spacer length 20 mm
A part that shims, centres or spaces two parts to the millimetre, to your dimensions and from the very first one.
Firm quotation within 24 working hours · From 1 part · Made in France · Shipped throughout Europe
Price my part