SANSIL 3D
Square tube end cap 30 x 30 mm
A part that carries a machine and damps its vibrations, to your dimensions and from the very first one.
The images are examples, not the part delivered. Every part is made from your 3D files or your dimensioned photographs, in the colours you choose, and we can incorporate your logo.
Feet, glides and end caps
Oval tube end cap 40 x 20 mm
A part that plugs, protects and neatly finishes off a tube or a drilled hole, to your dimensions and from the very first one.
On quotation — answer within 24 working hours
What it is for
- A part that plugs, protects and neatly finishes off a tube or a drilled hole
- Order without paying for a mould or a minimum quantity
- Receive a sample before the rest of the batch is made
Oval tube end cap 40 x 20 mm. It is the part that plugs, protects and neatly finishes off a tube or a drilled hole — built for your assembly, not for an average one.
You do not need a 3D file to order. A dimensioned drawing, a photograph taken square-on with a ruler beside the part, or the broken part sent to us by post is enough: we rebuild the geometry and submit the file to you before anything is manufactured.
The three materials we recommend for this part. PETG, our default choice: the default functional choice. Holds to 70 °C, flexible enough to take a knock without snapping, and it does not crack the way PLA does. ABS: the first real thermal step, 90 °C. It is also the material that sands and glues best when the part has to be finished after printing. ASA: ABS that does not yellow. It is the only UV-stable family in the range: outdoors everything else ages, ASA keeps its colour.
Envelope up to 350 × 350 × 350 mm, quantities from 1 to several hundred, precision matched to what the part has to do rather than to a commercial standard. All twenty workshop materials remain available for this part, from PLA to carbon-filled PPS rated at 200 °C: if your constraint differs from the one we assumed, tell us and we change material without changing the starting price.
Why work with us. 20 materials, from PLA to carbon-filled PPS. From decorative work to parts that hold 200 °C, everything is produced in the same workshop. You do not have to change supplier when the requirement turns technical. Change it without paying for a new mould. A dimension to correct, a hole to move: we edit the file and print again. On a mould, the same correction costs money and takes weeks. The part you cannot find any more. Mould destroyed, manufacturer gone, reference discontinued: this is where we have no competition. A photograph, a set of dimensions or the broken part is enough to make it again.
Your part, to your dimensions. Send us your 3D file, a dimensioned drawing, a photograph, or simply the part to be copied: we reproduce it faithfully or adapt it, from a single unit, with no tooling cost at all. The images on this page show typical work and are not contractual.
The three materials we recommend
| PETG | the default functional choice. Holds to 70 °C, flexible enough to take a knock without snapping, and it does not crack the way PLA does. |
|---|---|
| ABS | the first real thermal step, 90 °C. It is also the material that sands and glues best when the part has to be finished after printing. |
| ASA | ABS that does not yellow. It is the only UV-stable family in the range: outdoors everything else ages, ASA keeps its colour. |
Click a material to open its page and download the manufacturer's datasheet (PDF).
Oval tube end cap 40 x 20 mm in PETG: temperature resistance 70 °C; will not survive repeated dishwasher cycles; other option, ABS if it gets hotter than 70 °C.
Another material is possible: tell us the real constraint (temperature, UV, impact, contact) and we will suggest one.
What we commit to
| Unit volume up to 350 × 350 × 350 mm |
| From 1 to several hundred parts |
| Usual tolerance ±0.3 mm, ±0.15 mm on request |
| PETG recommended — 20 materials available |
Frequently asked
What if the material you recommend does not suit?
Tell us the real constraint — temperature, UV, contact with a product, load — and we change material. Twenty are available, from PLA to carbon-filled PPS.
Can you modify the original part?
Yes, and that is often the real benefit: thickening a rib that kept breaking, moving a hole, changing a diameter. On a mould, the same correction costs money and takes weeks.
I have no 3D file — is that a problem?
No. A dimensioned drawing, a photograph taken square-on with a ruler beside the part, or the part itself sent by post is enough. We rebuild the geometry and submit the file to you before anything is made.
In the same family
Square tube end cap 45 x 45 mm
A part that carries a machine and damps its vibrations, to your dimensions and from the very first one.
Rectangular tube end cap 40 x 20 mm
A part that carries a machine and damps its vibrations, to your dimensions and from the very first one.
Rectangular tube end cap 45 x 25 mm
A part that carries a machine and damps its vibrations, to your dimensions and from the very first one.
Round tube end cap with ribbed insert
A part that carries a machine and damps its vibrations, to your dimensions and from the very first one.
Glide pad made to customer leg dimensions
A part that carries a machine and damps its vibrations, to your dimensions and from the very first one.
Firm quotation within 24 working hours · From 1 part · Made in France · Shipped throughout Europe
Price my part