SANSIL 3D
Skirting board cable pass-through
A part that takes a cable through cleanly, to your dimensions and from the very first one.
The images are examples, not the part delivered. Every part is made from your 3D files or your dimensioned photographs, in the colours you choose, and we can incorporate your logo.
Cable pass-throughs
Square cable grommet for trunking
A part that routes the cables through without chafing them on the edge, to your dimensions and from the very first one.
On quotation — answer within 24 working hours
What it is for
- A part that routes the cables through without chafing them on the edge
- Hold a short run without tying up stock
- Match the exact dimension of your assembly, not a catalogue standard
Square cable grommet for trunking. A part that routes the cables through without chafing them on the edge, made to your dimensions rather than taken off the shelf.
You do not need a 3D file to order. A dimensioned drawing, a photograph taken square-on with a ruler beside the part, or the broken part sent to us by post is enough: we rebuild the geometry and submit the file to you before anything is manufactured.
The three materials we recommend for this part. PETG, our default choice: the default functional choice. Holds to 70 °C, flexible enough to take a knock without snapping, and it does not crack the way PLA does. ABS: the first real thermal step, 90 °C. It is also the material that sands and glues best when the part has to be finished after printing. TPU: rubber-flexible, and nothing else among the twenty does this job. It absorbs, it damps, it springs back to shape.
From the smallest detail up to 350 × 350 × 350 mm, as a single unit, as a spare part, in a short or a medium run: the process does not change, only the quantity does. All twenty workshop materials remain available for this part, from PLA to carbon-filled PPS rated at 200 °C: if your constraint differs from the one we assumed, tell us and we change material without changing the starting price.
Why work with us. No tooling, no minimum order. Injection moulding needs a mould costing thousands of euros, paid back over tens of thousands of parts. Here there is no mould. One part costs one part. Order 1 unit or 500, the price hides no set-up fee. 20 materials, from PLA to carbon-filled PPS. From decorative work to parts that hold 200 °C, everything is produced in the same workshop. You do not have to change supplier when the requirement turns technical. Change it without paying for a new mould. A dimension to correct, a hole to move: we edit the file and print again. On a mould, the same correction costs money and takes weeks.
Your part, to your dimensions. Send us your 3D file, a dimensioned drawing, a photograph, or simply the part to be copied: we reproduce it faithfully or adapt it, from a single unit, with no tooling cost at all. The images on this page show typical work and are not contractual.
The three materials we recommend
| PETG | the default functional choice. Holds to 70 °C, flexible enough to take a knock without snapping, and it does not crack the way PLA does. |
|---|---|
| ABS | the first real thermal step, 90 °C. It is also the material that sands and glues best when the part has to be finished after printing. |
| TPU | rubber-flexible, and nothing else among the twenty does this job. It absorbs, it damps, it springs back to shape. |
Click a material to open its page and download the manufacturer's datasheet (PDF).
Square cable grommet for trunking in PETG: temperature resistance 70 °C; will not survive repeated dishwasher cycles; other option, ABS if it gets hotter than 70 °C.
Another material is possible: tell us the real constraint (temperature, UV, impact, contact) and we will suggest one.
What we commit to
| Unit volume up to 350 × 350 × 350 mm |
| From 1 to several hundred parts |
| Usual tolerance ±0.3 mm, ±0.15 mm on request |
| PETG recommended — 20 materials available |
Frequently asked
Can you modify the original part?
Yes, and that is often the real benefit: thickening a rib that kept breaking, moving a hole, changing a diameter. On a mould, the same correction costs money and takes weeks.
I have no 3D file — is that a problem?
No. A dimensioned drawing, a photograph taken square-on with a ruler beside the part, or the part itself sent by post is enough. We rebuild the geometry and submit the file to you before anything is made.
What if the material you recommend does not suit?
Tell us the real constraint — temperature, UV, contact with a product, load — and we change material. Twenty are available, from PLA to carbon-filled PPS.
In the same family
Cable grommet with tilting flap
A part that takes a cable through cleanly, to your dimensions and from the very first one.
Worktop cable grommet 70 mm diameter
A part that takes a cable through cleanly, to your dimensions and from the very first one.
cable grommet in PC-FR UL94 V-0 for electrical cabinet
A part that takes a cable through cleanly, to your dimensions and from the very first one.
Flexible TPU cable grommet for sheet metal edges
A part that takes a cable through cleanly, to your dimensions and from the very first one.
wire grommet for 3 mm thick sheet metal
A part that takes a cable through cleanly, to your dimensions and from the very first one.
Firm quotation within 24 working hours · From 1 part · Made in France · Shipped throughout Europe
Price my part